The advantage of the handheld portable industrial videoscope is that it can be operated with one hand, and the bending and brightness of the probe can be adjusted; the small probe size can detect narrow spaces that cannot be seen by the human eye; it has clear display, video, and photo functions; the volume Small, light weight, reasonable portable structure, very convenient to use.
QBH borescope design of the whole machine is simple to operate,
and the volume is lighter, and it is easy to carry to other workplaces,
such as outdoors, high towers, wind turbines and other places for testing.
At the same time, pictures and videos can be saved to facilitate the preservation of test results for further analysis. And judgment, therefore, is a portable and practical surface defect detection instrument.
So how to choose a suitable handheld portable industrial videoscope?
Automobile maintenance: In the field of automobile maintenance and manufacturing, in order to avoid the cost increase caused by the disassembly of the engine, industrial endoscopes are widely used for visual inspection inside the engine; by using industrial endoscopes, the interior of the engine can be detected efficiently and intuitively Component carbon deposits, wear, causes of abnormal noise, corrosion and other faults.
②Electric power industry: Regularly inspect whether there are scars and stress corrosion cracks on the surface of the large column wheel core of steam turbine and generator. Detect the welding quality of the inner surface of the welds of pressure products such as main steam pipes, deaerators, headers, etc., and check whether there are serious welding defects. Check whether there are micro-cracks in turbine blades, retaining rings and stress concentration parts during overhaul.
③Petrochemical industry: It is used to check the welding quality of the inner surface of the welding joints of process pipes, pressure vessels, reactors, heat exchangers, etc., stress corrosion cracks and inner wall chemical corrosion and other defects.
④Petrochemical industry: It is used to check the welding quality of the inner surface of the welding joints of process pipes, pressure vessels, reactors, heat exchangers, etc., stress corrosion cracks and inner wall chemical corrosion and other defects.
1. Do not expose to direct sunlight;
2. Pay attention to the bending angle of the detection tube when it is stored, and do not bend it hard;
3. Do not use in flammable and other dangerous environments;
4. Wipe the product probe, pipeline, and casing after use for storage and next use
5. Please clean the probe according to the regulations, organize and store the instrument.
By info firstname.lastname@example.org Published On Or Welcome to click on the chat box on the left to inquire and leave a message