For various industrial equipment and instruments, correct operation, as well as regular cleaning, maintenance and upkeep can effectively extend the service life of the product. A considerable part of the after-sales problems of many industrial products are caused by improper use or maintenance.
QBH industrial endoscopes can be used for defect detection, status inspection, and quality control in various production processes. It is a common non-destructive testing method in industry. Industrial borescope often face harsh detection environments, and often need to detect water, oil, and corrosive objects inside pipes or components. It is even more necessary to better operate, clean, maintain, and maintain them.
When taking out the instrument, loosen the lock of the outer box of the instrument. While taking out the instrument main body, unwind the pipeline and let it gradually withdraw from the instrument box to avoid collision during the removal process. Do not pull with excessive force to avoid damage to the probe and If the lens is scratched, please handle it with care.
During the operation, gently insert the endoscopic cobra tube into the device under test and adjust the brightness of the light source to the appropriate illumination. Slowly operate the rocker to control the direction of the probe and detect the operation.
During the operation, gently insert the endoscopic cobra tube into the device under test and adjust the brightness of the light source to the appropriate illumination. Slowly operate the rocker to control the direction of the probe and detect the operation.
After use, confirm that the industrial endoscope coil probe is in a straight position, then pull it out fully, and then clean the coil. The lens part can be cleaned with a soft cloth dipped in a small amount of alcohol. The lens is IP67 waterproof, so there is no need to worry. Water damage destroys pixels.
In addition, QBH industrial endoscopes also remind you to pay attention to the following during use:
1. It is prohibited to use this instrument to observe the body of humans or animals;
2. It is prohibited to work on the detected object while it is electrified to avoid electric shock;
3. Do not directly touch the end of the lens during use. Pay special attention to this. After the endoscope is used in a high temperature environment, touching the end at this time may cause burns;
4. Do not bend, stretch, twist or crush the pipeline with excessive force, otherwise it may cause damage to the pipeline or equipment; 5) Long-term use of this product will cause stains on the lens, resulting in blurred images and affecting data collection. Please use it before use Wipe the lens clean with alcohol;
6. If you feel any abnormality during the angle adjustment operation, stop the current operation and shut down the machine, and then contact after-sales service;
7. After using the instrument, please clean the front end of the coil tube in time.
By info sales-21@qbhscope.hk Published On Or Welcome to click on the chat box on the left to inquire and leave a message
